N.C Sealer manufactured from best types of alkyd resins and filler. It is used as under
coat for bare and unfinished wood. It fills all pores on wood surfaces and provides
soft and adequate surfaces to be top coated with all general finishes top coat.
High viscous – high filling ability – fast drying – easy sanding.
Surface must be clean, dry and free of dust, grease or oils.
Sand the surface well, then dilutes to reach spray viscosity.
Apply using spray gun or piece of cotton.
Apply two coats with flash off – 10 minutes
Sand using sandpaper no. 320 for smooth surface.
Drying Time Surface Dry Complete Dry
At Temperature 25co 8 – 10 min 80 – 90 min
(8 – 10) m2/kg
Two years from production date if stored in original package at 25Co.